Where to install a carbon monoxide detector

Carbon monoxide detectors should fitted on each floor of your home as well as in the same room as any fuel burning appliance like a boiler, open fire or wood burning stove, between one to three metres horizontally from the potential source. Ideally the detectors should be on a wall, at least 15cm from the ceiling and at least 60cm from any window. Always follow the manufacturers instructions.

Gas stove and oven in a modern kitchen

Installing a carbon monoxide detector

Although each carbon monoxide detector will come with its own recommendations for fitting, you can follow some more of our guidelines below when choosing where to place the alarm in your home:

  • You’ll want the alarm to wake you if a leak occurs in the night, so keep your carbon monoxide detector in a place where you can hear the alert easily enough to wake you if necessary.
  • Preferably, you should place an alarm on each floor of your home and in the same room as each fuel-burning appliance.
  • When installing, always consult the manufacturer’s instructions on how to use and where to place your carbon monoxide detector.
  • Detectors should ideally be at a horizontal distance of between one to three metres from the potential source (boiler, fire, cooker, heater etc.) because these appliances can sometimes release a burst of carbon monoxide upon start up, causing the alarm to go off unnecessarily.
  • Some manufacturers also recommend placing the alarm on a wall close to the ceiling, as the warmer air from the fuel burning appliance can sometimes rise. Ideally this will be above door and window height, around six inches or more below the ceiling, at least one foot away from a corner.
  • If you’re fitting a carbon monoxide alarm in a bedroom that doesn’t have a potential carbon monoxide source in it, it’s ideal to fit the alarm at the same height that you sleep. This means that the alarm will read gas in the same way that you would breathe it in bed.

Choosing the best carbon monoxide detector for your home

The most important thing to look for when purchasing is that the carbon monoxide detector you choose complies with relevant European safety standards (clearly marked with the EN 50291) and carries the Kitemark symbol to show it is an official and effective product.

Secondly, ensure that you choose an audible alarm, as these are the most effective way to ensure you are notified to any carbon monoxide leaks as quickly as possible. These should make a loud beeping sound, as opposed to ‘black spot’ alarms, which you would need to visibly check.

You can choose between a battery or mains powered carbon monoxide alarm. Battery powered will give you more flexibility on placement, but be aware that you will need to replace the battery regularly if your monitor allows this, or the whole alarm if it is sealed.

As well as being available from us here at npower, you can also purchase carbon monoxide detectors in most DIY shops as well as online.

Carbon monoxide detector testing

You should regularly check the battery life of your CO alarm and test it using the in-built test button, much in the same way you would a smoke alarm.

Understanding carbon monoxide levels

Many carbon monoxide detectors have screens showing the reading of CO levels. These are usually measured in parts per million (PPM). Anything below 35PPM is considered safe for exposure over an 8 hour period. 200PPM is where mild symptoms are likely to occur and anything over 400PPM is considered extremely dangerous.

What to do if your carbon monoxide detector alarm goes off

If you hear you carbon monoxide detector going off at any point, you should immediately do the following:

  • Turn off any appliances that could be the source of carbon monoxide
  • Open doors and windows to let fresh air into your home
  • Check everyone in your home is awake and accounted for
  • If anyone is exhibiting symptoms of CO poisoning, contact a GP or medical professional immediately
  • At the earliest opportunity, contact a qualified gas safe registered engineer to check all possible sources to locate the problem area

Legal requirements for carbon monoxide detectors

Recent regulations state that all landlords are legally required to put carbon monoxide alarms in any properties they rent out which contain a solid fuel burning combustion appliance. For homeowners, it is heavily advised to have CO alarms fitted throughout your home, although this is not yet legislation.

Can't find your answer online?

To get you to the right person faster, please have your account number handy when you contact us.